Driver Drone

The figure shows a network card installed on the PCI Express x1 slot. Incorrect field values can cause the system to malfunction. If this happens, revert to the default setting [Auto]. See pages and Failure to do so may cause severe damage to both the motherboard and the components.

Uploader: Doktilar
Date Added: 18 January 2013
File Size: 31.18 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 2167
Price: Free* [*Free Regsitration Required]

The configuration options vary depending on the CPU installed.

ASUS P5GD1 Pro User’s guide – e p5gd1 pro | Martin Lacetti –

The following figure illustrates the location of the sockets: This is a reminder that you should shut down the system and unplug the power cable before removing or plugging in any motherboard component.

Check local regulations for disposal of electronic products.

Matrix Storage technology supported. Orient the red markings on the floppy ribbon cable to PIN 1. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

7.1 PCIe gaming sound card set with an audiophile-grade DAC and 116dB SNR

Press the load lever with your thumb A and move it to the left B until it is released from the retention tab. See page for details. The utility then updates asks corrupted BIOS file. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC.


P5GD1 PRO | Motherboards | ASUS Global

Incorrect field values can cause the system to malfunction. ASUS exclusive Raid Mode can be turned on right in the heat of gaming action with just one-click on the audio control box to provide the exact audio adjustment you want. Instant Sound Status Check. When set to [Disabled], the data transfer from and to the device occurs one sector at a time.

Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable. Select Y e s to save changes and exit.

S t a n d a r d – activates overclocking on a threshold between light and heavy CPU loading. Even if you are not prompted to use the Setup program, you can change the configuration of your computer in the future.

Turn on the system. The number of device items that appears on the screen depends on the number of devices installed in the system. CPU Parameter Recall feature. Two hard disks perform the same work as a single drive but at a sustained data transfer rate, double that of a single disk alone, thus improving data access and storage. R A I D 0 Data striping optimizes two identical hard disk drives to read and write data in parallel, interleaved stacks.


You can also restart by turning the system off and then back on. If one drive fails, the disk array management software directs all applications to the surviving drive as it contains a complete copy of the data in the other drive.

Setting wrong values in below sections may cause system to malfunction. Replace the system cover. The utility displays the following message and automatically checks the floppy disk for the original or updated BIOS file. Instructions that you MUST follow to complete a task. User input is not required when installing the driver in silent or unattended preload modes.

A u t o – loads the optimum sensitivity and overclocking percentage setting. Simultaneously press the 1 retaining clips outward to unlock the DIMM.

The time now is The following sub-items appear when this item is Disabled. Move the jumper cap from pins default to pins The new drive must be of the same size or larger than the existing drive.