Once the Floral Designs folder is showing on the PC side of the screen, double click on it to see the designs in the folder. Join the Janome community. Customizer will send a request over the USB cable to the MC to receive information about the folders on the device you selected. If your MC is connected to your computer with a USB cable, you can send a design that is on the Customizer design screen directly to your sewing machine. If this is acceptable, click OK to proceed with the selection.
|Date Added:||1 November 2012|
|File Size:||46.28 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Memory Craft Special Edition Embroidery. Each click will set a check-mark on the design.
Point to the folder where you want the designs sent. The Send button will activate again. The sequence to send a design to the MC is:. Turn the power switch ON again and check that Version 1. The Send button will deactivate once the designs are transferred.
Support Register Warranty Contact Us. The sequence to delete designs from the MC is: In Step 2, we tell the Customizer where the designs are stored.
A Jef Name dialog box will appear with the name highlighted. Join the Janome community. The folder we want to select is called My Designs. In Step 2, we tell Customizer where the designs are stored.
Learn More Download Now. The middle part of the box has three buttons for the action you want to do to communicate between the PC and the embroidery machine. Place the files on a USB memory key. The left side of the box shows folders and designs on your PC. This is done because communicating with the Built-in memory is the default choice for the Send Uanome, Receive and Delete dialog box.
To point to the folder where we want to receive the designs, we go to the PC side of the dialog box, which is on the left. Products Inspire Learn Blog.
We will receive it and write it mc110000 the My Designs folder that was written on your hard drive when Customizer was installed. We can change the name before we send it to the MC We do not have to repeat step 1 because Built-in Memory is currently selected. In the dialog box to the right, only one folder, Embf, is in the built-in memory, so it is the only one showing.
Memory Craft 11000 Special Edition
Turn the power switch ON. Click the Receive action button Step isb. Select the designs you want to send. The middle part of the box has three buttons for the action you want to do to communicate between the PC and the embroidery machine.
Support Register Warranty Contact Us. Double click on the folder where you want your designs to be sent. The left side of the box shows folders and designs on your PC.
Janome America: World’s Easiest Sewing, Quilting, Embroidery Machines & Sergers
Customizer will send a request over the USB cable to the MC to receive information about the folders on the device you selected. This is the path to get to the designs: You can send the design to a folder in the Built-in memory, to a folder on a compact flash card ATA card that is inserted into your sewing machine, or to a folder on a USB Memory Key that is inserted into the USB master port on your sewing machine.
I am still learning what its capabilities are When we open a design, the name of the design is shown on Customizer ‘s title bar.