Driver Drone

Results 1 to 15 of When windows has completely loaded again, plug in the kingston to the usb 2 port. Then double click on the Setup. There was a problem completing your request. Never approach a computer etc. Should I unintall the card and the Flash drive and the install the card first, then install the drivers for the Flash drive.

Uploader: Guran
Date Added: 17 August 2015
File Size: 24.82 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 83239
Price: Free* [*Free Regsitration Required]

Is it the USB drivers you mean. Originally Posted by NooNoo. Replace in the usb 2 card do not use the slot nearest the agp pc-usb Boot to normal mode and add the drivers.

The ones marked Hyperion 4 in 1 drivers. Always use the latest via drivers. To start viewing messages, select the forum that you want to visit from the selection below. Still the same problem with the kingston USB 2. Never approach a computer etc. Results 1 to 15 of Windows should not start any hardware wizards Reboot to normal mode.


If you are using Windows ME pci-uzb Windows 98 with the Plus enhancement pack, they have a built-in compression agent that will allow you to extract zip files by right clicking and highlighting “Extract All”. I think we may have finally solved this problem.


If there is more than one entry or the hub is no longer connected then yes. August 2nd, August 26th, Install the vias Disconnect all usb devices. Thank you for your quick reply.


I have deleted one of the entries. Once that is working, add back your usb devices one at a time – DO NOT plug in the usb device first, load the drivers, reboot then do it unless pcu-usb software specifically requests that you plug in the usb device. The USB card was recognized after the driver was installed, but did not work properly after the next boot.

I have the most up-to-date BIOS for my board. I did install the usb flash drive before the USB card, because I first installed a self powered USB Hub but the flash drive kept crashing the Hub requiring reboot to get the hub back up. If so m the documentation it m527 the ali m pci usb card is not suitable for USB 2.


When windows has completely loaded the desktop no eggtimers Run the drivers for the kingston usb stick. You have suggested installing the second on the list Via 4 in 1 Version 4. Get the help and guidance you need from experienced professionals who care. Is the a driver conflict?

I went to the ECS site and located my motherboard in the archives section. Choose the “Save File” option and save it to your folder under Windows where you file your drivers. Click on update driver button.

May 8th, Ensure that assingn irq to usb is enabled. Via seem to update their drivers weekly. Funny thing though the Version 4. Any suggestions will be most welcome, and thanks for your site. When I do this using the CD supplied with the card I get a message that the best driver is already installed.